Skip to content
العربية

Products

Steel products

Flat, long and coated steel, roofing and cladding, insulated panels, pipe and tube, and solar mounting structures, made to EN, ASTM, JIS, BS and Egyptian standards. We cut coil to length or slit it to width, and deliver to site.

  1. Cold-rolled steel coils on wooden pallets

    01

    Flat steel

    • HRC
    • CRC

    Hot-rolled coil, sheet and plate for structures, fabrication and pipe-making, and close-tolerance cold-rolled sheet for furniture, appliances, panels and drums.

    Hot-rolled and cold-rolled steel
  2. Stack of galvanized steel sheets cut to length

    02

    Coated steel

    • GI
    • GL

    Hot-dip galvanized and 55% aluminium-zinc Galvalume coil and sheet for roofing, cladding, ducting, framing and solar frames.

    Galvanized and Galvalume steel
  3. Stacks of trapezoidal steel roofing sheet

    03

    Pre-painted steel & roofing

    • PPGI
    • PPGL
    • Corrugated
    • Trapezoidal

    Colour-coated GI and GL in RAL colours, and profiled roofing and cladding sheet for warehouses, factories, farm buildings and canopies.

    Colour-coated steel and roofing sheet
  4. Section through a five-rib steel roof panel with a rock wool core

    04

    Sandwich panels

    • PU/PIR
    • EPS
    • Rock wool

    Roof, wall and cold-room panels: two pre-painted steel skins bonded to an insulating core.

    Insulated panels for roofs, walls and cold rooms
  5. Steel beams and columns laid out in a fabrication hall

    05

    Sections & bars

    • IPE
    • HEA
    • HEB
    • UPN
    • Rebar

    Beams, columns, channels and angles for steel frames, ribbed rebar for concrete, and round, square and flat bar for fabrication.

    Steel for frames and concrete
  6. Bundles of galvanized steel pipe

    06

    Pipes & hollow sections

    • ERW
    • SHS
    • RHS

    Black and galvanized welded pipe for water, gas and structures, and square and rectangular hollow sections.

    Pipe and tube for services and structures
  7. Solar panels on a steel mounting structure on a flat roof

    07

    Solar mounting structures

    • Rooftop
    • Ground-mounted

    Columns, rafters, purlins and rails that carry PV modules, hot-dip galvanized or Zn-Al-Mg coated.

    Mounting structures for solar plants

At a glance

ProductStandardsTypical range
Hot-rolled (HRC)EN 10025-2 · ASTM A36 · JIS G3101 · EN 101111.5–25 mm · coil, sheet or plate
Cold-rolled (CRC)EN 10130 · JIS G3141 · ASTM A10080.3–3.0 mm · coil or sheet
Galvanized (GI)EN 10346 · ASTM A653 · JIS G33020.15–3.0 mm · zinc Z80–Z275
Galvalume (GL)EN 10346 · ASTM A792 · JIS G33210.25–2.0 mm · Al-Zn AZ100–AZ185
Pre-painted (PPGI, PPGL)EN 10169 · ASTM A755 · JIS G3312 · JIS G33220.25–1.2 mm · RAL colours
Roofing & cladding sheetOn GI, GL, PPGI or PPGL0.3–0.8 mm · cut to length
Sandwich panelsEN 14509Cores 30–200 mm · skins 0.4–0.6 mm
Structural sectionsEN 10025-2 · ASTM A366 m and 12 m lengths
RebarES 262-2/2021 · BS 4449 · ASTM A615Ø 10–32 mm · 12 m bars
Merchant barsEN 10025-2Round, square and flat
Welded pipe (ERW)EN 10255 · ASTM A53½″–8″ NB · 6 m
Hollow sections (SHS, RHS)EN 10219 · ASTM A50020–200 mm · 6 m
Solar mounting structuresISO 1461 · EN 10346 (protection)Rooftop and ground-mounted

Ranges shown are typical. Other grades, sizes and coatings are available to order.

Not sure what to specify?

Tell us what the steel is for. We'll help you choose the grade, standard, coating and thickness, so what arrives matches your project specification.

Request a quoteSpec & grade advice

Request a quote

Send us your specification

Tell us the product, grade, size and quantity, and where it needs to go. Our sales team will come back to you with availability and a price.

Request a quote